| After-sales Service: | Video Technical Support ,Online Support |
|---|---|
| Warranty: | 12 Months |
| Type: | Rack-body Style |
| Transmission Type: | Manual |
| Emission Standard: | Euro 3 |
| Load Capacity: | 1-10t |
| Customization: |
|---|
Suppliers with verified business licenses
Audited Supplier A Grid cargo truck or lorry is a motor vehicle designed to transport cargo. Trucks vary greatly in size, power, and configuration, with the smallest being mechanically similar to an automobile. Commercial trucks can be very large and powerful, and may be configured to mount specialized equipment, such as in the case of fire trucks and concrete mixers and suction excavators. Modern trucks are largely powered by diesel engines exclusively,
although small to medium size trucks with gasoline engines exist in America. In the European Union vehicles with a gross combination mass of less than 3,500 kilograms are known as light commercial vehicles and those over as large goods vehicles.
|
Whole vehicle main dimensions
|
Overall dimensions (LxWxH)mm
|
5875×2030×2230
|
|
|
Wheel base(mm)
|
3360
|
|
Weight data
|
Curb weight(kg)
|
2600
|
|
|
Gross vehicle weight(kg)
|
6495
|
|
|
Persons in cab
|
3
|
|
Whole vehicle main performance
|
Max. speed(km/h)
|
95
|
|
ENGINE
|
Model
|
F3.8s3141
|
|
|
Emissions standards
|
EuroIII
|
|
Displacement(L)
|
3.76
|
|
|
|
Rated Power(kw/rpm)
|
105
|
|
|
Max torque (N.m/rpm)
|
450
|
|
Gearbox
|
Model
|
6TS55
|
|
Front axle
|
Type/Mainreducetion ratio
|
2.2T
|
|
Rear axle
|
Type/Mainreducetion ratio
|
5.5T/4.11
|
|
Suspension
|
Front suspension/Leaf spring number
|
3+1
|
|
|
Rear suspension/Leaf spring number
|
6+7
|
|
Brake system
|
Service brake
|
Drum pneumatic braking
|
|
|
Parking brake
|
Central drum brake
|
|
|
Auxiliary brake
|
Engine exhaust brake
|
|
Wheels and tyre size
|
6+1(7.00R16)
|
|
|
Tops requirements |
Cargo van size
|
Inner wide: 4170 * 2100 * 2100 mm
|
|
|
Structure requirements
|
1, the height of the box plate: 400mm; 2, Base 2, Edge 1.2; 3. Cargo box electrophoresis 4. Off the back door |
|
The technological requirements
|
welding
|
1. All welding parts should be cleaned of oil, rust and other dirt before welding 2. The height of the weld shall not be lower than the thickness of the base metal, and the welding strength shall not be lower than the strength of the base metal. 3. The welding shall be firm and reliable, and the weld shall be full, smooth, uniform and smooth. There shall be no weld defects such as false welding, welding leakage, welding nodus and pores |
|
|
riveting
|
Riveting should be firm and reliable, rivets arranged neatly, rivet head is not allowed to have cracks, deflection, incomplete phenomenon, rivet head and parts surface must be close, not loose, leakage, water leakage |
|
|
Bolt connection
|
The screw connection should be firm and reliable, the tightening torque should meet the requirements of JB/T6040, and the exposed length of the bolt should be 2 ~ 3 buttons. |
|
|
adhesive
|
All joints are sealed with polyurethane sealant. The glue is uniform and continuous, and no glue residue is allowed to fall off.
|
|
|
paint
|
The total thickness of the outer surface paint film is ≥45μm, the light color is uniform, and there is no obvious flow mark and exposed bottom |
Suppliers with verified business licenses
Audited Supplier 
){kind=link}
){kind=link}